It is a practical product that can be applied to existing room and building entrance doors, as well as in automatic glass door planning to be preferred at 90 degrees, can be applied as single or double wings and meets every need with rich accessories.
Gilgen FDC model wing type circular door automation, which has a wide range of applications from standard room doors to 90 degree building entrance doors, is a product that promises high performance and comfort, which has been subjected to various tests that meet the most specific European norms, produced with the highest quality materials. The electromechanical automation unit, which operates extremely quietly, also provides ease of application with its compact structure and stylish design with stainless steel body. The system, which makes it possible to install on existing doors with apparatus suitable for any situation, offers a wide range of arms (push, pull or parallel pull arm, etc.) that provide the connection between the motor unit and the wing. With a wide range of accessories, it is possible to install the automation wherever it is suitable, on the beam, wall or frame in the direction or opposite to the opening direction of the sash. If there is no wall, beam or frame of sufficient height above the door wing, it is even possible to apply the automation system on the wing so that it moves with the wing.
Gilgen FDC model automatic door control systems have designed automation systems suitable for every situation so that you can use the doors in every part of your building with the highest performance. Outdoor doors, unlike indoor doors, need to resist wind power. Therefore, there are significant mechanical differences between indoor and outdoor doors. For this reason, Gilgen automatic door control units have developed 2 basic units, FDC-E model for indoor and FDC model for outdoor doors and F4 model for use in extra heavy duty doors called “heavy duty”.
FDC models can be used in single-leaf doors as well as double-leaf circular doors by synchronizing two motor units to each other. In addition, there is another model called FDC-B, which has been specially developed for fire resistance and smoke tightness in circular opening wing type doors. Applicable wing width for FDC and FDC-E models minimum 700mm maximum 1400mm Maximum 300kg. Applicable wing width for FDC-B fire resistant doors min. 900mm max 1400mm max 200kg. FDC-F4 model is for extra heavy doors over 300kg.
